• Constructed from High Quality Neoprene Elastomeric Materials
• Designed to Resist Aging, Compression Set, Water and Oil 
• Features Alternate Rib Height for Additional Vibration Isolation Under  Both High and Low Weight Loads
• Cross Ribbed Pad with 1/2” Cork for Additional Sound Isolation
• Combination Pads (Rubber & Cork) are 7/8” Thick

Sizing Information

• Pads Should be Sized so There is No More Than 50  Pounds per Square Inch of Machine Weight  On It When Installed(Most Machinery is Designed with Approximately 50 PSI Maximum Base Loading)
• Installing a Pad Equal to the Size of the Foot with 1/2” Overlap All Around Will Generally Insure Proper Loading

To Dampen Vibration

Example: A Machine Weighing 1800 Pounds Will Require an Anti - Vibration Pad Approximately 6” x 6” 
(1800 ÷50 PSI = 36 Square Inches or One 6 x 6 Pad). A 3 x 3 Pad Under Each Leg is Required, Provided the Weight is 
Distributed Evenly Among the Four Legs

For Impact Machines (Punch Presses, Drop Hammers)

A Lesser Loading Capacity is Recommended - Generally 25 PSI
A Double Thickness of a Pad May be Used to Accomplish Proper Loading If Desired

• When Hold Down Bolts are Necessary, the Bolt Should be Isolated from the Machine
• Recommended Maximum Loading Capacity: 50 Lbs per Square Inch